PRODUCTS
DESCRIPTION
PRİCE:£599.99
Prince subject 20% VAT

The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your MaxiSys MS905/MS908 Tablet (with PC software to follow in Q3 2015), which turns into a powerful diagnostic tool, providing you an insight to the inner workings of a vehicle’s electronic circuits.

Featuring the user-friendly UI design combined with the unrivalled hardware specs, the MP408 system is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicle.

Power for the MaxiScope MP408 Module comes directly from the USB port of your Autel MS905/MS908 tablet making the system very versatile and portable to use.

  • Features one-click auto setup of voltage scale and time base
  • Works on all makes and models of modern vehicles
  • Compatible with LIN, CAN and FlexRay data bus standards
  • Reads and displays electrical signals in high resolution waveforms
  • Allows manual editing of measurement parameter display
  • Records and plays back waveform data
  • Features colour coded 4-channel control panel
  • Intuitive UI design features easy trigger point adjustment and real time scale info display
  • Direct power supply through USB connection
  • Free online software update through the Internet
  • Portable design with strong housing and protective rubber boot

The MaxiScope MP408 includes;

  • CD
  • User Manual
  • 3m (10ft) Screened Test Leads x 4
  • Secondary Ignition Pickup x 1
  • Attenuators 20:1 x 2
  • 2-pin Breakout Lead x 1
  • Large Crocodile Clip Set x 1
  • Small Crocodile Clip Set x 1
  • Acupuncture Probe Set x 1
  • Multimeter Probes x1

Specification

  • Vertical resolution 12 bits
  • Channels 4
  • Bandwidth 20MHz
  • Accuracy 1%
  • Sensitivity 10mV/div to 20V/div
  • PC Interface USB 2.0 – Cable supplied
  • Power Requirements Powered from USB port
  • Input Ranges (full scale) ±v50mV to ±100V in 11 ranges
  • Input Impedance 1MΩ in parallel with 22pF
  • Input Type Single-ended, BNC connector
  • Input Coupling Software selectable AC/DC
  • Overload Protection ±200V on single input
  • Buffer Memory 32M samples shared among active channels
  • Waveform Buffer Up to 1000 waveforms
  • Timebase Ranges 100ns/div to 1000s/div
  • Operating Temperature Range 0°C to 50°C (15°C to 40°C for quoted accuracy)
  • Storage Temperature Range -20°C to +60°C
  • Storage Humidity Range 5% to 95%RH, Non-condensing
  • Dimensions 190X115X38mm
  • Weight < 0.5kg
  • Maximum Sampling Rate (Single Shot)
  • 1 or 2 channels in use 80MS/s
  • 3 or 4 channels in use 20MS/s